USB 5V 12V reloj de coche GPS Beidou sincronización satelital 12/24 horas reloj electrónico LED pantalla de tiempo Digital apagado reloj de memoria

USB DC 5V 12V GPS/ Beidou timing car clock Electronic Clock LED Digital tube does not need to adjust the time /power off memory /automatic brightness

Note: The clock is designed for use in cars and is not waterproof. Cannot be used on motorcycles

the clock only work in the car or outdoors

Because it is a satellite signal timing . only GPS signal outside

Usage: EE: Represents time zone (set according to your own country's time zone)

Set the EEtime zone. Get the car powered. Drive to an open place on the road.10 minutes later, when the satellite signal is received, the time becomes the local time.

Module electrical parameters:

Power supply voltage :DC5~15V(cut off the USB head to connect to the car 12V) Maximum current :80mA

Product Description:

GPS and Beidou satellite timing car clock, no need to manually set the time, the car will automatically receive GPS or Beidou satellite calibration time in outdoor open areas. Normal use of the car can maintain the time minute-by-second, long-term accuracy. The clock has an automatic brightness function, which automatically adjusts the screen brightness according to the ambient light, so that the driving at night is not dazzling. And has the function of time zone setting, can also be used abroad. There are 12 - and 24-hour options.

Brightness, auto brightness, 12/24 hours setting instructions:

Press and hold the button on the back. The screen shows AL:1. This is the switch for the automatic brightness function. Short press after release to change the value. AL:1 is open. After adjusting the automatic brightness, long press the key to enter the next setting LL: x, which is the setting of manual brightness value. After releasing the key, short press the key to change the value. The adjustment range is LL:1~5, and the parameter can take effect only after the automatic brightness function is turned off. Then long press the key to enter the next setting FF:, which is the switching option of 12 and 24 hours system, FF:12 is 12 hours system, FF:24 is 24 hours system, after adjusting this parameter, finally long press the key to save and exit.

Time zone Settings:

Under the normal display state, press the key five times within 1 second to enter EE:, which is the time zone setting. Press short to change the value, which ranges from -12 to 12. Adjust the time zone for foreign users. After setting the time zone value, press and hold for 2 seconds to save and exit.